GC/GD Two Piece Front Arms

$875.00$950.00

Clear
SKU: gcgdfrontarms-1 Category:

Description

These 2-piece arms are based on European rally heydays. This arm offers a huge amount of caster/camber adjustment and the arm is easy to fix when damaged.  Most of the time to get your arm back in order a cheap compression strut is all that’s needed. We recommend the 2-piece arms for road race cars that have the means to test and fine tune their car. 

 All 2-piece arms come with TSS bearing and pin, this will lower the steering geometry about 1.5 inches. This will be useful for cars that have aftermarket roll center kits,  

Note These arms are not a direct fit for GC chassis as there is a lip on the chassis rail hammer or cut and trim away as show in the photos of green arms.

We offer 4 widths from stock GD width to 60 mm wider.  All the arms are adjustable somewhat, but if you have a special application these sizes are for you. We stress that the inner DOJ/CV will not last or work at all over 20mm wider on the car and even at 20 there is a huge risk. 

Powder coating: There is a wide range of colors in stock, if you need a custom color visit www.prismaticpowders.com. This option will have added cost, that is for any color we have on hand or you provide. Getting powder coating through us will add another week to your order as this is not an in-house operation. When you do order powder coat please make a note of what color you would like in check out. 

Additional information

Weight 18 lbs
Dimensions 16 × 16 × 5 in